Increase/Allocation Of Memory; Uses; Suggested Values - Xerox Document Centre 400 series User Manual

2.3
This sections explains how to allocate memory when increasing it.

2.3.1 Uses

Memory is meant for the following uses:
• System
• Receive buffer
• Page buffer
• PCL 6 memory
• PS memory

2.3.2 Suggested values

System
Area used by the printer system, with the capacity remaining unchangeable.
Receive buffer
A receive buffer is prepared for each port to receive data from multiple ports. There are
various types of receive buffer:
• Parallel memory
• Serial memory
• lpd spool
• NetWare memory
• AppleTalk memory
Parallel memory
This is a receive buffer for parallel interface use. In general, the default values are
sufficient but if necessary, increase the capacity. When the capacity is increased, the
processing might become faster. When the parallel interface is not in use, inactivate it and
allocate the memory for other purposes.
Serial memory
This is a receive buffer for serial interface use. In general, the default values are sufficient
but if necessary, increase the capacity. When the capacity is increased, the processing
might become faster. When the serial interface is not in use, inactivate it and allocate the
memory for other purposes.
Increase/Allocation of
Memory
2
23