Xerox Document Centre 400 series User Manual page 63

Printer
The "Printer" tab defines the current hardware configuration of the printer. The optional
devices that are physically installed on the printer must be indicated here that they are
available for use.
The "Sharing" tab appears when the print sharing feature is turned on in the
"Network" dialog box which is accessed by double-clicking the "Network" icon in
the Control Panel.
Paper Source Options
Specify the optional paper source that is attached to your printer besides the default paper
source device, Tray 1. The printer image and the Paper Source drop-down list in the
"Paper/Output" tab will change accordingly once this is updated.
Bypass Tray
Select this if your printer is installed with this manual feeder which is able to handle
various paper sizes.
Select Tray Body:
Provides two options of which either and only one must be installed in the printer:
• 3-Tray Cabinet (default)
Select this if your printer is installed with this input tray cabinet which allows
paper to be fed from three trays (Tray 2, Tray 3, Tray 4).
• High Capacity Feeder
Select this if your printer is installed with this input tray cabinet which allows
paper to be fed from one tray (Tray 2) and two high capacity feeders (Hi-Cap.
Feeder 1, Hi-Cap Feeder 2).
If this is not checked, Bypass Tray (Manual) will not be available for Paper
Source on the "Paper/Output" tab.
• If 3-Tray Cabinet is not checked, Tray 3 and Tray 4 will not be available for
Paper Source on the "Paper/Output" tab.
• If High Capacity Feeder is not checked, Hi-Cap. Feeder 1 and Hi-Cap.
Feeder 2 will not be available for Paper Source on the "Paper/Output" tab.
4.3 Configuring the Printer Drivers
4
51