Xerox Document Centre 400 series User Manual page 111

Table of Contents

Advertisement

Menu Item
Explanation
Memory Changes
• Receive Buffer Memory (For lpd/PD Spool)
(con't...)
Port Status
Sets the state of the various ports when the power is switched on.
• Parallel
Sets to activate/inactivate the parallel port when the power is on.
The candidate values are as follows:
• Enabled (Default)
• Disabled
• Serial
Sets to activate/inactivate the serial port when the power is on.
The candidate values are as follows:
• Enabled
• Disabled (Default)
• lpd/PD*
Sets to activate/inactivate the lpd/PD port when the power is on.
The candidate values are as follows:
• Enabled
• Disabled (Default)
This item is displayed when the interface card (for Ethernet 100BASE TX/5) is installed.
• NetWare*
Sets to activate/inactivate the NetWare port when the power is on.
The candidate values are as follows:
• Enabled
• Disabled (Default)
This item is displayed when the interface card (for Ethernet 100BASE TX/5) is installed.
* Optional
• After removing the additional RAM module and switching on the power, the
following process will be executed automatically if memory becomes
insufficient compared with the previous memory setting:
(1) Change and allocate the setting values of the various memories (e.g.
Receive buffer memory).
(2) If allocation in (1) is not possible, stop the status of port related to
Ethernet and reallocate.
To increase the memory capacity of the receive buffer, either stop the status
of port not in use or install the additional RAM module.
Activates the parallel port when the power is on.
Inactivates the parallel port when the power is on.
Activates the serial port when the power is on.
Inactivates the serial port when the power is on.
Activates the port in use by lpd/PD when the power is on.
Inactivates the port in use by lpd/PD when the power is on. If transport is not set, it
will automatically move to the transport setting menu when Disabled is selected.
Activates the port in use by NetWare when the power is on.
Inactivates the port in use by NetWare when the power is on.
5.3 Common Menu Items
99
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Document centre 350 seriesDocument centre 250 series

Table of Contents