Xerox Document Centre 400 series User Manual page 66

4.3 Configuring the Printer Drivers
Paper/Output
4
54
The "Paper/Output" tab has option settings that determine the print environment in which a
job is printed. Notice that there are image displays of Job Type, Paper Size, Image
Orientation and Duplex Print to the left of these drop-down lists, which will change
according to the selections made. There is also a display of the printer with clickable image
areas of the paper input and output devices. You can either click on these displays or
choose from the combo boxes to make selections.
Job Type
Specify the type of job you are handling:
• Print
• Fax (available only if Fax Unit is selected on the "Printer" tab.)
Copies
Specify the number of copies to print. The valid range is 1-999 copies. Default is 1.
Paper Size
Specify the paper size to use for the print data. Options include:
• A4 (210 × 297 mm) (default)
• 8.5 × 11" (Letter)
• B5 (182 × 257 mm)
• B4 (257 × 364 mm)
(when Fax is selected for Job Type on the "Printer" tab: available at all times;
when Print is selected: available in either one of the following conditions:
(a) B4 (257 × 364 mm) is selected for Paper Detected by Tray on "Printer" tab; or
(b) 8.5 × 14" (Legal) for Paper Detected by Tray and Bypass Tray for Paper
Source Options are selected on the "Printer" tab)