Installing High Capacity Pack Adapters (Optional) - MUTOH VJ-1324 Quick Reference

VJ-1324 QUICK REFERENCE
NOTE NOTE
• If the printer perform the nozzle check printing immediately after initial ink charge is complete,
the following results may occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow "4.2.3 Head cleaning" and refill a small amount of ink. Then, check the
printing result.
If there is no improvement in the print result even after refill a small amount of ink, leave the
printer unused for an hour or more. Then, refill a small amount of ink again and check the print
result.
If there is still no improvement, contact your local MUTOH dealer.
3.4.2

Installing high capacity pack adapters (optional)

Use the optional high capacity pack adapters to use the 1000ml ink packs on this printer.
Follow the procedure below to install the high capacity pack adapters.
1. Turn the printer ON.
• The printer starts the initializing operation.
• After the initial operation is compete, "Start Ink Charge – > E" is displayed on the operation
panel.
3-17
3 Basic usage