Changing And Confirming Settings While Printing; Procedure For Changing And Confirming Settings While Printing - MUTOH VJ-1324 Quick Reference

VJ-1324 QUICK REFERENCE
3. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
CAUTION
• Pay attention to the following points when cutting roll media.
Mishandling the razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
1
2
3
No.
1
2
3
• The procedure for cutting the roll media is complete.
NOTE NOTE
• When loading the new roll media, cut the front edge of the media if it is not straight.
3.7.5

Changing and confirming settings while printing

While the printer is operating, you can change or confirm settings for the Panel setup menu.
3.7.5.1

Procedure for changing and confirming settings while printing

Follow the procedure below to change or confirm settings for the Panel setup menu.
Media guide
Media cut groove
Razor blade
Name
3-35
3 Basic usage