Adjust The Print Head; Standard Adjust Print - MUTOH VJ-1324 Quick Reference

VJ-1324 QUICK REFERENCE
5.1.2

Adjust the print head

It is used for optimizing the quality of image prints.
This printer has the following adjustment methods.
Adjustment
method
Standard Adjusts only the print mode in the user type setting which is
currently set.
Custom Adjusts all print modes.
NOTE NOTE
• This printer was adjusted at the factory shipment so that it obtains the optimum printing quality.
Adjust the quality if the print quality changes after the installation environment or the media is
changed.
• If you change the user type settings after performing Standard Adjust Print, make sure to perform
Adjust Print.
• When performing Custom adjust print, the print modes are adjusted all at once. Therefore, you do
not need to perform print adjustment even when the user type setting has been newly set or changed.
• When using RIP software, etc, and setting the resolution which is different from the setting in the
user type setting, make sure to perform adjustment for all print modes by Custom Adjust Print.
5.1.3

Standard Adjust Print

Adjusts only the print mode in the user type setting which is currently set.
This menu is made up with the following menus.
Menu Name
Standard Confirmation
Pattern
Standard Rough
Adjustment Pattern
Standard Micro
Adjustment Pattern
Follow the procedure below to adjust print quality.
1. Print the confirmation pattern and check the amount of misalignment.
5.1.3.1 Standard Confirmation Pattern
Description
Description
Print the confirmation pattern and check the amount
of misalignment.
Perform this adjustment when the misalignment is
big.
Perform this adjustment when the misalignment is
small.
5.1.3.1 Standard Confirmation
Pattern
5.1.3.2 Standard Rough Adjustment
Pattern
5.1.3.3 Standard Micro Adjustment
Pattern
5-3
5 Troubleshooting
Reference
5.1.3 Standard Adjust Print
5.1.4 Custom Adjustment Pattern
Reference