Cleaning The Cleaning Wiper - MUTOH VJ-1324 Quick Reference

VJ-1324 QUICK REFERENCE
3. Press the [>] key on the operation panel to select the cleaning mode.
4. Press the [Cleaning] key on the operation panel for at least two seconds.
• "Cleaning **%" is displayed on the operation panel.
• Start Head cleaning.
• After Head cleaning is complete, the operation panel shifts to Normal.
NOTE NOTE
• If blurs or lacking parts in printed media do not disappear with one time of Head cleaning,
perform Strong cleaning.
• If blurs or lacking parts in printed media do not disappear with several times of Head cleaning,
refer to "5 Troubleshooting", and take appropriate measures.
4.2.4

Cleaning the cleaning wiper

This section describes how to clean the cleaning wiper.
(1) Time for cleaning
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
4-21
4 Daily maintenance