When High-Capacity Ink Pack Adapter Is Removed From Printer - MUTOH ValueJet VJ-HCIPADPT-UV6 Operation Manual

3.2 When High-Capacity Ink Pack Adapter is removed from Printer

When the high-capacity ink pack adapter is removed from printer, follow the procedures below to wipe
off the ink.

Make sure to wipe off the ink adhering to the ink pack adapter when removing from the
printer.
If not, the ink may be attached to the printer.
(1) Items to Prepare
・ Rubber Gloves: Supplied with Printer (Commercially available solvent-resistant gloves can be
used as an alternative.)
・ Plastic Gloves: Supplied with Printer (Commercially available solvent-resistant gloves can be
used as an alternative.)
・ Goggles or Protective Glasses: Supplied with Printer (Commercially available goggles can be
used as an alternative.)
・ Protective Clothing (Commercially available)
・ Paper Towel (Lint-free cloth): Supplied with Printer
(Commercially available lint-free cloth can be used as an alternative.)
・ Cleaning Stick: Supplied with Printer (Commercially available tissue can be used as an
alternative.)

When performing this cleaning, be sure to wear the gloves supplied with the printer (or
solvent-resistant gloves) and goggles, and take extra care that ink does not contact with
your skin.
If the UV curable ink or waste liquid gets on your skin or in your eyes, it may cause
inflammation or an allergic reaction.

Do not touch uncured ink with your bare hands.

If ink gets on the gloves, use new gloves.

If ink gets on your clothes, promptly remove them and wash them before reuse.

If ink gets on your skin, immediately wash with soap and plenty of water for 15 minutes. If
any symptoms persist, seek medical attention.

If ink enters your eye, wash it for 15 minutes with plenty of water and promptly seek
medical attention/first aid.

If you swallow the ink, immediately rinse out your mouth, but do not induce vomiting.
Seek medical attention/first aid.
High-Capacity Ink Pack Adapter OPERATION MANUAL
15