MUTOH VJ-1324 Quick Reference page 136

5 Troubleshooting
4. Check the both ends and the center of the print result that printed with Adjust pattern, and select the
number from 1 to 11 that is not out of alignment.
• "3" is selected in the next printing sample of "Micro Adjustment Pattern A".
• "5" is selected in the next printing sample of "Micro Adjustment Pattern B".
• "4" is selected in the next printing sample of "Micro Adjustment Pattern F".
NOTE NOTE
• "6" is the current setting value.
5. "PatternA: 6" is displayed on the operation panel.
5-22
VJ-1324 QUICK REFERENCE