MUTOH VJ-1324 Quick Reference page 151

VJ-1324 QUICK REFERENCE
(4) Media jams frequently occur
NOTE NOTE
• If media other than the recommended one is used, correct media feeding cannot be assured.
No. Possible cause
1 Are you using the recommended media?
2 Is the media used in an environment other than
the one specified?
3 Are you using the old media?
4 Are you using the folded or wrinkled media?
5 Does the media bend?
(5) The media veers during printing
No. Possible cause
1 Are you using the recommended media?
2 Is the loading position of the media correct?
3 Is the scroller set correctly?
Remedy
Use the recommended media.
Use the media in a dedicated environment.
Replace it with new media.
Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Remedy
Use the recommended media.
Set the media correctly.
Set the scroller correctly.
5-37
5 Troubleshooting
Reference
"4.2.1 Media
type" in the Operation
Manual
"4.2.2 Cautions
on handling media" in
the Operation Manual
"6.1.2 Replacing
Roll Media" in the
Operation Manual
"4.2.1 Media
type" in the Operation
Manual
"5 Panel setup
menu" in the
Operation Manual
Reference
"4.2.1 Media
type" in the Operation
Manual
3.5 Loading
media
3.5.1 Loading
roll media