Printing-Related Troubleshooting - MUTOH VJ-1324 Quick Reference

5 Troubleshooting
5.3.4

Printing-related troubleshooting

(1) Printing is partially stained or incomplete
NOTE NOTE
• Proper print quality may not be obtained with the media other than the recommended one.
No. Possible cause
1 Does the media include moisture?
2 Are you using the folded or wrinkled media?
3 Does the media bend?
(2) The printing position is incorrect (some parts of the media cannot be printed
on)
No. Possible cause
1 Is the loading position of the media correct?
2 Did you set up the origin and print position?
Remedy
Replace it with new media.
Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Remedy
Set the media correctly.
Cancel or reset the settings of the origin and
print position.
5-38
VJ-1324 QUICK REFERENCE
Reference
"6.1.2 Replacing
Roll Media" in the
Operation Manual
"4.2.1 Media
type" in the Operation
Manual
"5 Panel setup
menu" in the
Operation Manual
Reference
3.5 Loading
media
"5 Panel setup
menu" in the
Operation Manual