MUTOH VJ-1324 Quick Reference page 153

VJ-1324 QUICK REFERENCE
(3) Printing is blurred
No. Possible cause
1 Are you using the recommended media?
2 Are you using the thick or thin media?
3 Is the media printed on the printing surface?
4 Did you perform Alignment?
5 Did you perform Media feed compensation?
6 Is the temperature setting of each heater
appropriate?
7 Is the head height set to High?
Remedy
Use the recommended media.
Use the recommended media.
Confirm the printing surface of the media and
set it correctly.
Perform Alignment.
Perform Media feed compensation.
Set the temperature appropriately.
Return the head height to "Low".
5-39
5 Troubleshooting
Reference
"4.2.1 Media
type" in the Operation
Manual
"4.2.1 Media
type" in the Operation
Manual
3.5 Loading
media
5.1.2 Adjust the
print head
"4.2.6 Media
feed compensation"
in the Operation
Manual
"5.1.1.1.5
Preheater menu" to
"5.1.1.1.7 Dryer
menu" in the
Operation Manual
"4.2.5 Head
height adjustment" in
the Operation Manual