Custom Rough Adjustment Pattern - MUTOH VJ-1324 Quick Reference

5 Troubleshooting
4. Confirm that the confirmation pattern printing result is as follows.
• Check each of the confirmation patterns A to F.
a. When the printing result is OK;
You do not need perform Adjust Print.
The procedure for Adjustment is complete.
b. When the printing result is ×:
you need to perform Alignment.
• Perform rough adjustment when the misalignment is big.

5.1.4.2 Custom Rough Adjustment Pattern

• Perform micro adjustment when the misalignment is small.
• When all patterns A to F require adjustment:
• When any pattern of A to F requires adjustment:
5.1.4.2 Custom Rough Adjustment Pattern
Check the confirmation pattern, and when the misalignment is big, perform rough adjustment.
Print a rough adjustment pattern and register the setting value.
1. Display the Custom Adjust Print menu on the operation panel in the same way as in step 2 of "5.1.4.1
Custom Confirmation Pattern"
5.1.4.3.1 Adj. PatternALL
5.1.4.3.2 Each Adjust Patterns
5-20
VJ-1324 QUICK REFERENCE