MUTOH VJ-1324 Quick Reference page 126

5 Troubleshooting
3. Press the [Enter] key on the operation panel.
• "Warming Up", and then "Warming Up Skip -> E" are displayed.
NOTE NOTE
• To start printing during warming up, press the [Enter] key while "Warming Up Skip -> E" is
displayed.
3.7.7 Start Printing during Warm up
• A confirmation pattern for print quality adjustment is printed after warming up.
• Regarding adjust print patterns, the same patterns are printed on both edges and the center of the
paper.
4. Check the both ends and the center of the print result that printed with Adjust pattern, and select the
number from 1 to 7 that is not out of alignment.
• "6" is selected in the next printing sample.
NOTE NOTE
• "4" is the current setting value.
5-12
VJ-1324 QUICK REFERENCE