VJ-1324 QUICK REFERENCE
5. Shake the high capacity pack adapter gently two to three times and insert it to the slot.
NOTE
NOTE
• Make sure that the ink pack and smart chip are installed on the high capacity pack adapter
before inserting it to the slot. If the high capacity pack adapter is inserted into the slot without
the ink pack, the remaining information will be rewritten and the ink pack will not be usable.
•
Insert the high capacity pack adapter all the way to the end of the slot.
6. Confirm that the operation panel returns to Normal.
NOTE
NOTE
• If the high capacity pack adapter is replaced during a print job, the printer resumes printing.
•
Replacing the high capacity pack adapter is complete.
4.1.2
Replacing Cutter
This section describes when and how to replace the cutter.
(1) Replacement time
Replace the cutter when the following situation occurs.
a. When the paper is not cut smoothly
b. When the cut surface is feathered, etc
(2) Type
Our genuine cutter that is compatible with the printer is as follows.
Description
Cutter replacement blade
(3) Replacing steps
Follow the procedure below to replace the cutter.
1. If the printer is turned ON, make sure the following.
•
Printing or other operations are not in progress.
•
The operation panel display is Normal.
Model No.
VJ-CB
4-7
4 Daily maintenance