Cutting Media - MUTOH VJ-1324 Quick Reference

VJ-1324 QUICK REFERENCE
2. Press the [Cancel] key on the operation panel for two seconds.
• The printer operates as follows.
Printer status
During printing
Receiving data/analyzing data Deletes the data already received and converted.
NOTE NOTE
• If a large amount of data is saved on the printer, the operation panel may not return to Normal by a
single [Cancel] key operation.
In such cases, wait for a few seconds and press the [Cancel] key again.
3.7.3

Cutting media

If Media ejection mode is set to "Cut", the printer cuts the media automatically after printing.
"5.1.6 Output Mode menu" in the Operation Manual
If you press the [Cutting] key on the operation panel more than two seconds while the operation panel is
Normal, you can cut the media at the desired position.
Follow the procedure below to cut the roll media.
1. Confirm that the operation panel is Normal.
Operation with the [Cancel] key pressed for two seconds
Terminates the printing, and deletes one data remaining in the printer.
3-33
3 Basic usage