MUTOH VJ-1324 Quick Reference page 145

VJ-1324 QUICK REFERENCE
3. Move the print head section from the top of the media to the right.
NOTE NOTE
• When the head height is set to Low, switch it to High before moving the Head.
Change the setting back to Low after moving the Head.
"4.2.5.1 When raising the print head" in the Operation Manual
"4.2.5.2 When returning the print head to the original position" in the Operation Manual
No.
1
2
4. Raise the media loading lever.
No.
1
Print head section
Roll media
Media loading lever
Name
Name
5-31
5 Troubleshooting
1
2
1