Micro Adjustment Patterns; Adjustment Pattern All - MUTOH ValueJet VJ-1628TD Operation Manual

VJ-1628TD, VJ-2628TD OPERATION MANUAL
NOTE
• If you press the [Cancel] key on the operation panel while "PatternA (2A/2H): *" is displayed,
the entry screen will go back to "PatternA (1A/1H): *".
7. In the same way, enter "PatternB (1A/1H): *".
• Press the [Enter] key to determine it.
• If the ink color combination is "8color" or "6color", continue to enter "PatternB (2A/2H): *" and
determine it.
8. In the same way, enter "PatternC (1A/1H): *".
• If the ink color combination is "8color" or "6color", continue to enter "PatternC (2A/2H): *" and
register it.
• Once all set values have been entered and the [Enter] key is pressed, the set values of "PatternA"
to "PatternC" will be registered.
• The display of the operation panel returns to "Adj1. ConfirmPattern".
3.7.3

Micro Adjustment Patterns

For Micro Adjustment Patterns, there are "Adjust Pattern All" which is used to adjust all patterns and
"Adjust print Pattern A", "Adjust print Pattern B", and "Adjust print Pattern C", which are used to adjust
A to C patterns separately.
From the confirmation pattern result, if adjustment for all patterns is not necessary, adjust separately.
3.7.3.1

Adjustment Pattern ALL

Print out Micro Adjustment Pattern ALL, and register the set value.
1. In the same way as the step 2 of "3.7.1 Confirmation Patterns", change the display on the operation
panel to Adjust Print Menu.
2. Use the [+] key or [–] key on the operation panel to select "Adj3. : Adj. PatternALL".
3-87
3 Before using