5.1.2
Adjust the print head
Follow the procedure below to adjust print quality.
NOTE
NOTE
•
This printer was adjusted at factory shipment so that it obtains the optimum print
quality.
Adjust the quality if the print quality changes after the installation environment or the
media is changed.
1. Turn ON the printer and load the roll media.
3.5.2 Setting roll media
2. Confirm that the printer functions normally.
3. Display the Printing mode menu on the operation panel.
a. Press the [Menu] key on the operation panel.
•
"Menu 1: Setup>" is displayed on the operation panel.
•
The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
•
"Set1: MediaType" is displayed on the operation panel.
5 Troubleshooting
VJ-1204 QUICK REFERENCE
5-3