Fiery Webtools - Canon ColorPass-Z7400 Configuration Manual

3
3-4 Preparing for ColorPASS Setup
Operator privileges
Operator control includes control of print jobs from the job management tools,
including the ability to override job settings.
Guest privileges (no password)
No password is needed for a user to log in as a Guest from the job management tools.
A Guest can view the status of active jobs but cannot make changes to jobs or to the
ColorPASS state.

Fiery WebTools

The ColorPASS can support Internet or intranet access from Windows and Mac OS
computers with Fiery WebTools. To enable use of Fiery WebTools, you must do the
following in Setup:
• Enable TCP/IP.
• Set an IP address, subnet mask, and gateway address for the ColorPASS.
• Enable Web Services.
For more information, see
Fiery WebTools are not supported on Mac OS X.
N :
OTE
You can set passwords to control access to Fiery WebTools features. If you do not
specifically set these passwords, all users have access to all Fiery WebTools functions
(see "Passwords"
Installer, and WebScan
Status
The Status WebTool provides you with current information on the jobs processing and
printing on the ColorPASS. It is not affected by passwords. For more information, see
the Printing Guide.
Chapter 6.
on page 3-3). Fiery WebTools include Status, WebLink, WebSpooler,
™ .