Accessing Setup Options - Canon ColorPass-Z7400 Configuration Manual

4
4-10 Performing Setup from the Control Panel

Accessing Setup options

T S
O ACCESS ETUP WHEN THE
1. Make sure the information screen on the Control Panel reads Idle.
If Printing or RIPping appears, the ColorPASS is processing, and you must wait
until the system finishes and reaches the Idle state.
2. Press the Menu button on the Control Panel to access the Functions menu.
3. Scroll down with the down arrow button and press the line selection button next to
Run Setup.
If an Administrator password has been set on the ColorPASS, you are prompted
to enter it before you can perform Setup (see
4. When prompted, confirm your choice to proceed to Setup.
5. Press the line selection button to choose a Setup menu or command.
Use the down arrow button to view the remaining screens of the main Setup
menu.
6. Perform Server Setup, Network Setup, and Printer Setup, in that order.
This is the minimum required for initial Setup. Later, you can complete the
remaining Setups, either from the Control Panel or a Windows computer.
7. Set an Administrator password to protect your Setup from unauthorized changes.
Review the settings described in this chapter.
C PASS I
OLOR IS DLE
"Setting passwords" on page 7-2).