Setting Up Fiery Webtools - Canon ColorPass-Z7400 Configuration Manual

6
6-2 Configuring Fiery WebTools
T F W T
O ACCESS IERY EB OOLS
1. Start your Internet browser.
2. Enter the IP address or DNS name of the ColorPASS.
3. Press Enter.
The ColorPASS home page appears.
4. Click the name of a particular WebTool.
5. Click Configure to enable specific WebTools for users.

Setting up Fiery WebTools

In order for network users to access and use Fiery WebTools, you must set certain
ColorPASS options in Network Setup and Printer Setup. You also must prepare each
user's workstation to communicate with the ColorPASS over the Internet or intranet.
For more information about Network Setup, see
T F W T
O SET UP IERY EB OOLS ON THE
1. Set Enable Ethernet to Yes in Network Setup > Port Setup > Ethernet Port Setup.
2. Set Enable TCP/IP for Ethernet to Yes in Network Setup > TCP/IP Ethernet Setup.
3. Set Enable Web Services to Yes in Network Setup > Network Service
Setup > Web Services Setup.
4. Exit Network Setup, and choose OK to Save Changes.
5. Exit Printer Setup, and choose OK to Save Changes.
Chapter
C PASS
OLOR
2.