Table of Contents
Advertisement
A
A-4 Troubleshooting
After this Setup screen
Any Bindery Setup screen
This message
Novell error code, followed by
a message.
In Network Setup, when you configure the IPX (Novell) connection, the ColorPASS
queries the network for Novell file servers and trees, and attaches to them temporarily.
If a guest login is enabled, it will be used. If not, you are prompted to log in from
Command WorkStation.
If the selected NetWare file server or tree does not have a guest account, or if the guest
account has expired or been disabled by the NetWare supervisor, you will be prompted
to notify the IPX (Novell) administrator. In that case, there are two options:
• Enable a guest account on the NetWare server or tree for the purpose of setup.
• Log in with a different account. At the
name (
) to
guest
supervisor
prompted for a password, enter the correct password for the account you named.
Means
Novell NetWare has reported an error.
Command WorkStation reports the error number and
displays a brief message.
For the most common errors (listed in the following table),
a screen is displayed that allows you to retry the action that
evoked the error, such as adding a server. If that is
not possible, you are prompted to notify the Novell
administrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for
further explanation of Novell error codes.
ENTER LOGIN NAME
or enter another valid login name. When you are
screen, change the default
Advertisement
Table of Contents
