Adapters/Ports - Canon ColorPass-Z7400 Configuration Manual

5
5-8 Setting up the ColorPASS from a Windows Computer

Adapters/Ports

In local Setup only, the installed network boards are displayed. You cannot change this
information. From remote Setup, you can enable Ethernet. These options are
described in the following section.
Ethernet (Port Setup)
Enable Ethernet
Transmission Speed
network to which the ColorPASS is connected.
When you select Auto Detect, make sure that the auto-negotiation settings for
N :
OTE
speed and duplex are configured for the network port to which the ColorPASS is
connected. Similarly, when you select a different setting such as 100 Mbps
Full-Duplex, make sure the same settings are configured for the network port.
The 1 Gbps (gigabit per second) setting is full-duplex.
N :
OTE
—Select to connect the ColorPASS to an Ethernet network.
—Select an appropriate setting according to the settings of the