Commands - Canon ColorPass-Z7400 Configuration Manual

7
7-15 Using FieryBar

Commands

Right-clicking FieryBar allows you to access many ColorPASS features. You can choose
the following commands from the menu that appears:
Command
WorkStation
ColorWise Pro Tools
Setup Fiery
Restart Fiery
Clear Server
Cancel Processing
Cancel Print
Suspend Print
Resume Print
Run Diagnostics
Log Off Windows
Hide FieryBar
Starts Command WorkStation. For information about
using the features of Command WorkStation, see the
Management Guide.
Starts ColorWise Pro Tools. For information on using the
features of ColorWise Pro Tools, see the
Enters the Setup menus for the ColorPASS. See
Chapter 4.
Restarts the ColorPASS system software without
rebooting the entire system. Network access to the
ColorPASS is temporarily interrupted and all currently
processing jobs are aborted and might be lost. Choose
Restart Fiery instead of using the power or reset buttons
on the front of the ColorPASS.
Clears all jobs in all server queues and all jobs archived on
the ColorPASS hard disk drive. Check with the site
administrator before choosing Clear Server.
Cancels the job currently processing on the ColorPASS.
Cancels the job currently printing on the ColorPASS.
Suspends communication between the ColorPASS and
the copier. To continue printing jobs from the
ColorPASS, choose Resume Print.
Resumes communication between the ColorPASS and
the copier after you have chosen Suspend Print.
This function is provided for service representatives only.
For information about running diagnostics, contact your
authorized service/support technician.
Allows you to log on to Windows XP Embedded as a
different user.
Hides FieryBar. To show FieryBar after hiding it,
right-click the Fiery icon on the right side of the
Windows taskbar and choose Show FieryBar from the
menu that appears.
Job
Color Guide.