Canon ColorPass-Z7400 Configuration Manual page 191

A
A-3 Troubleshooting
After this Setup screen
Select File Server From List
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
Enter First Letters
of Server Name
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
View Server List,
Edit Connection
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
Add File Server
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup>Service
Setup > PServer Setup >
Bindery Setup)
This message
Error. Cannot open bindery
connection to NDS server.
No NetWare file
server found.
File server name not found.
Try again?
No file server is selected.
All connections used.
Remove server?
No NetWare print
server found.
Means
Select this server through NDS setup or disable NDS and
select it through bindery.
No file server was found when ColorPASS queried the
network to create a list of supported servers or a list of
all servers.
Check cable connections and make sure the NetWare
server is turned on.
No file server with those letters was found when
ColorPASS queried the network. Check the name of the
NetWare file server, check cable connections, and make
sure the NetWare server is turned on.
No file server has been added in Bindery Setup.
You have added the maximum number of bindery servers,
which is eight. You now have the option of disconnecting
one of those servers, so as to add another.
No print server was found when ColorPASS queried the
file server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle ColorPASS print
jobs (see "Configuring a NetWare server for printing"
page 2-10).
on