Exiting Setup - Canon ColorPass-Z7400 Configuration Manual

5

5-45 Exiting Setup

T
O REMOVE PRINTING GROUPS AND PASSWORDS
1. Select Printing Groups from the Command WorkStation Server menu.
2. Select the printing group name in the Printing Groups Setup dialog box, and
click Remove.
3. Click OK.
Exiting Setup
When you have finished specifying Setup options in local Setup, click OK and close
the Setup dialog box. You are notified that the ColorPASS must be restarted for the
new settings to take effect. You can restart now or later. To restart, choose the Restart
Fiery command in the FieryBar menu. If you changed the network configuration or
other settings affecting the Windows XP Embedded software, you must restart
Windows XP Embedded by choosing Start>Shut Down at the Taskbar for those
changes to take effect.
When you have finished specifying Setup options in remote Setup, click Save and then
Reboot Server for the new settings to take effect. The ColorPASS reboots, and all the
changes take effect. If Command WorkStation is running, the connection to the
ColorPASS is lost and you must log on again when the server has restarted.
After you have completed Setup and restarted the ColorPASS for the first time, install
the user software for printing on remote workstations, as described in the
Installation Guide. To confirm the network connection and your Setup, print a test job
from a remote workstation.
User Software