Canon ColorPass-Z7400 Configuration Manual page 107

4
4-43 PostScript Setup options
T PS S
O ACCESS ETUP OPTIONS
1. In the main Setup menu, choose PS Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
In the list of options that follows, default values, where applicable, appear in
square brackets.
Default Paper Sizes
US/Metric [US in North America, Metric elsewhere]
Specify whether to print on US paper sizes (for example, Letter, Legal, 11
Metric paper sizes (for example, A4 or A3) by default. When no page size is defined
within a PostScript file, jobs are printed on Letter paper if you selected US; A4 paper if
you selected Metric.
Convert Paper Sizes
No Letter/11x17->A4/A3 A4/A3->Letter/11x17 [No]
Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11
is automatically printed on A4 paper.
This option works in conjunction with the Default Paper Sizes option. For
N :
OTE
example, if Convert Paper Sizes is set to Letter/11
is set to US, then jobs are printed A4/A3 size. This also includes ColorPASS system
pages such as the Start Page, Test Page, and Job Log.
Print to PS Error
Yes/No [No]
Specify whether the ColorPASS should print the available portion of a print job when
it encounters a PostScript error. Select Yes to print the portion of the job that was
processed before the error occurred; select No to cancel the print job entirely when a
PostScript error is encountered. Leave this option at No unless you encounter
printing problems.
17), or
x
x 17->A4/A3, a letter size document
x 17->A4/A3, and Default Paper Sizes