Canon ColorPass-Z7400 Configuration Manual page 34

2
2-6 Setting up Network Servers
Configuring clients of a Windows NT 4.0/2000/Server 2003 server
Each client of a Windows NT 4.0/2000/Server 2003 server is already using a
network protocol to communicate with the server. Each client can print to the
ColorPASS if it has been shared by a Windows NT 4.0/2000/Server 2003 server or
Windows NT 4.0/2000/XP/Server 2003 clients. In that case, the client does not have
to use the same network protocol to connect to the Windows NT 4.0/2000/Server
2003 server as the server uses to communicate with the ColorPASS.
T
O CONNECT AND PRINT TO THE
W NT 4.0/2000/S
INDOWS
• For Windows 98/Me clients: Before printing, double-click the
Windows NT 4.0/2000/Server 2003 server icon in the Network Neighborhood window,
and then double-click the printer name.
You are prompted to set up the printer. When you choose to set it up, the Add Printer
Wizard dialog box appears. Follow the procedures in the
Guide.
• For Windows NT 4.0 clients: Before printing, connect to the print server computer and
select the ColorPASS. Right-click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
• For Windows 2000/XP/Server 2003 clients: Before printing, install the printer driver
with the User Software CD and configure the port.
After clients have selected the printer, they can choose it from the Print Setup,
Page Setup, or Print dialog box of their application. Clients can change printing
options for their own job, but printer properties appear dimmed, and unavailable
for changing. When a client chooses Print, the job is transmitted to the
Windows NT 4.0/2000/Server 2003 print server, and from there to the selected print
connection on the ColorPASS. The job is listed in the Print Manager on the client
workstation, and the administrator can track it in the ColorPASS window of the Print
Manager on the Windows NT 4.0/2000/Server 2003 print server.
C PASS
OLOR SHARED BY A
2003
ERVER SERVER
User Software Installation