Canon ColorPass-Z7400 Configuration Manual page 103

4
4-39 Network Setup options
Fiery E-mail Domain Name
Enter the name of the domain in which the user has an account. This is typically the
part of the e-mail address that follows the @ symbol. For example, in the address
pat@test.com
Account Name
Enter the account name. This is the internal name your network recognizes, which is
not necessarily the same as User Name.
Password
Enter the password for the e-mail account.
Administrator E-mail User Name
Enter the administrator name of the administrator e-mail account. This is typically the
part of the e-mail address that precedes the @ symbol. For example, in the address
pat@test.com
Administrator E-mail Domain Name
Enter the name of the domain in which the administrator has an account. This is
typically the part of the e-mail address that follows the @ symbol. For example, in the
address
pat@test.com
The administrator authorizes a unique e-mail address to remotely administer the
E-mail Services via e-mail. This includes the Fiery Address Books, designed for use in
sending scan files to a particular e-mail address the user chooses at the ColorPASS
Control Panel, and in controlling user access to E-mail Services. If an error occurs
while you are executing a job via e-mail, the e-mail service sends an error message to
that administrator e-mail address. The administrator can authorize additional e-mail
addresses as administrators from this e-mail address.
Timeout (sec)
30–300 [60]
Enter the length of time, in seconds, that the ColorPASS should try to connect to each
e-mail server before determining that the connection is unsuccessful.
, the domain name is
test.com
, the administrator e-mail user name is
, the domain name is
.
pat .
.
test.com