Table of Contents
Advertisement
3
3-8 Preparing for ColorPASS Setup
ColorPASS system software
The ColorPASS uses Windows XP Embedded system architecture to receive and
process jobs and send job data to the copier. To log on to the ColorPASS, enter
Administrator
Configuring and monitoring the Windows XP Embedded functions from the
N
:
OTE
ColorPASS require the ACI. For more information, contact your authorized
service/support technician.
Resident on the Windows XP Embedded software is the following software unique to
the ColorPASS:
• Server—The Server is an independent software process started automatically
whenever Windows XP Embedded is started. As the central element of ColorPASS
system software, the Server process controls the spooling, rasterizing, and printing of
jobs, as well as job accounting (the Job Log), storage, and retrieval.
When the Server is not running, jobs cannot be received by the ColorPASS, job
processing cannot occur, job data cannot be transferred to the copier for printing,
and the job management tools cannot connect to the ColorPASS. In the event that
you need to restart the Server process, right-click FieryBar and choose Restart Fiery.
• Command WorkStation—Command WorkStation is the interface tool for the
Server. It provides a graphical interface for viewing and controlling Server functions.
You cannot access Server functions from Command WorkStation LE.
N
:
OTE
About Setup
Setup configures the ColorPASS to communicate with other devices and manage print
jobs. You must perform Setup the first time you turn on the ColorPASS after new
system software is loaded. An initial Setup using default settings is adequate for
allowing users to print to the ColorPASS and use the Fiery WebTools. When your
network or user printing environment changes, you can change Setup options
accordingly.
as the user name, and enter the password "
Fiery.1
".
Advertisement
Table of Contents
