Postscript Setup Options - Canon ColorPass-Z7400 Configuration Manual

4
4-42 Performing Setup from the Control Panel
Publish Direct Connection
Yes/No [Yes]
This option allows users to print (or download) jobs to the ColorPASS without
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
If you plan to download fonts to the ColorPASS, you must publish the
Direct connection.
Publish Print Queue
Yes/No [Yes]
This option allows users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the ColorPASS hard disk drive and printed
on a first-in, first-out basis. Only queues published in the Printer Setup are available to
users.
Publish Hold Queue
Yes/No [Yes]
Use this option to allow users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Printer Setup; select No to return to the
main Setup menu without making any changes.

PostScript Setup options

PS (PostScript) Setup allows you to set defaults for the ColorPASS. Users can override
most of these defaults on a job-by-job basis. However, users printing from UNIX or
DOS command lines cannot override defaults from their applications. Therefore, you
must set defaults in PS Setup. For information about these defaults, see the Printing
Guide.