System Software; User Software; Checking The Service Mode Of Connection Engine; How To Obtain The Fiery Password - Canon imagePRESS Server G250 V2 Service Manual

• CAN/CSA C22.2 No. 60950-1:2007 +A1:2011 +A2:2014 (TUV NRTL)
• GS Mark by TUV, EN60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
• EAC - Republic of Belarus, Republic of Kazakhstan, Tajikistan, Kyrgyzstan and Armenia (TBD)
• CCC - China
■ EMI/EMC approvals
• FCC Title 47, Part 15 Subpart B, Class B-NA
• ICES-003, Issue 5, August 2012, Class B-NA
• VCCI-CISPR32 Class B, Japan
• EN55032:2012/AC:2013, Class A, EU
• EN55024:2010 (EU)
• AS/NZS CISPR 32:2012/AC:2013, Class B
• EN61000-3-2:2014
• EN61000-3-3:2013
• EAC - Republic of Belarus, Republic of Kazakhstan, Tajikistan, Kyrgyzstan and Armenia
• CCC - China

System Software

System Software Fiery System

User Software

PS PrinterDriver
[Win/Mac] PPD File
[Win] Job Properties
[Mac X] Job Properties
[Win/Mac] Impose/Compose
[Win/Mac] Command WorkStation
[Win/Mac] Fiery Remote Scan
[Win/Mac] Hot Folder
[Win] EFI Printer Delete Utility
[Mac] Fiery Software Uninstaller

Checking the Service Mode of Connection Engine

When connecting imagePRESS Server, it is necessary to select the engine service mode COPIER > OPTION > INT-FACE >
IMG-CONT to "3".
When the controller is connected, the automatically recognized value is displayed in the following service mode.
COPIER > OPTION > INT-FACE > CNT-TYPE > xxx
CNT-TYPE
465

How to obtain the Fiery password

To log on to the imagePRESS Server as an administrator or operator, you must obtain the Fiery password.
To obtain the Fiery password
1. Make sure that the imagePRESS Server is connected to the printer.
2. Print the imagePRESS Server Configuration page from the display panel on the imagePRESS Server or the printer LCD
panel. "To print the Configuration pages" on page 67
Item
Item
imagePRESS Server G250 V2.0
1.0
6.3.009.0
2020/3/24
3.5.0.028
3.5.0.028
6.0.0.15
6.5.0.32
6.7.0.25
4.01.0.09
3.4.0.10b
1.9.0.11
Model
8
1. Introduction
Ver.
Ver.