Canon ColorPass-Z7400 Configuration Manual page 73

4
4-9 ColorPASS Control Panel
Suspend Printing
Resume Printing
Shut Down
Clear Server
Run Setup
Run Diagnostics
Tray Alignment
Calibration
Suspend communication between the ColorPASS and the copier. You must
suspend printing if you want to interrupt the current ColorPASS job and use the
copier to make copies or print another job first. Jobs continue to process on the
ColorPASS. After you make the copies, choose Resume Printing to continue
printing jobs from the ColorPASS.
Resume communication between the copier and the ColorPASS after you have
finished making copies or printing other jobs.
Shut down all ColorPASS activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the ColorPASS. The following
options are available from the submenu that appears:
—Resets the server software but does not reboot the entire system.
Restart Server
Network access to the ColorPASS is temporarily interrupted and all currently
processing jobs are aborted and might be lost.
—Shuts down all ColorPASS activity properly.
Shut Down System
Reboot System —Shuts down and then reboots the ColorPASS.
Clear all jobs in all server queues, as well as all jobs archived on the ColorPASS hard
disk drive, the index of archived jobs (in the Archive window), all FreeForm
masters, and the index of FreeForm masters (in the FreeForm window). Consult with
your administrator or operator before choosing Clear Server. If an Administrator
password has been set, you must enter it to access Clear Server.
Enter the Setup menu and change Setup option settings.
This function is provided for service representatives only. For information about
running diagnostics, contact your authorized service/support technician.
Adjust the placement of text and images on a page so that they are correctly
aligned on the sheet of paper and both sides of a duplex sheet have the exact same
alignment. For more information on this function, see the
Calibrate the ColorPASS using AutoCal or ColorCal. For more information, see the
Color Guide. If an Administrator password has been set, you must enter it to access
Calibration.
™
Job Management Guide.