The Dhcp Table Screen - ZyXEL Communications 310 User Manual

The following table describes the labels in this screen.
Table 18 Dashboard > VPN Status
LABEL
#
Name
Encapsulation
Algorithm
Refresh Interval
Refresh

5.2.5 The DHCP Table Screen

Use this screen to look at the IP addresses currently assigned to DHCP clients and the IP addresses
reserved for specific MAC addresses. To access this screen, click DHCP Table in System Status in
the dashboard.
Figure 56 Dashboard > System Status >DHCP Table
The following table describes the labels in this screen.
Table 19 Dashboard > DHCP Table
LABEL
#
Interface
IP Address
Host Name
MAC Address This field displays the MAC address to which the IP address is currently assigned or for which
Description
Reserve
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
This field is a sequential value, and it is not associated with a specific SA.
This field displays the name of the IPSec SA.
This field displays how the IPSec SA is encapsulated.
This field displays the encryption and authentication algorithms used in the SA.
Select how often you want this window to be updated automatically.
Click this to update the information in the window right away.
DESCRIPTION
This field is a sequential value, and it is not associated with a specific entry.
This field identifies the interface that assigned an IP address to a DHCP client.
This field displays the IP address currently assigned to a DHCP client or reserved for a specific
MAC address. Click the column's heading cell to sort the table entries by IP address. Click the
heading cell again to reverse the sort order.
This field displays the name used to identify this device on the network (the computer name).
The ZyWALL learns these from the DHCP client requests. "None" shows here for a static DHCP
entry.
the IP address is reserved. Click the column's heading cell to sort the table entries by MAC
address. Click the heading cell again to reverse the sort order.
For a static DHCP entry, the host name or the description you configured shows here. This field
is blank for dynamic DHCP entries.
If this field is selected, this entry is a static DHCP entry. The IP address is reserved for the MAC
address.
If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned to a DHCP
client.
To create a static DHCP entry using an existing dynamic DHCP entry, select this field, and then
click Apply.
To remove a static DHCP entry, clear this field, and then click Apply.
Chapter 5 Dashboard
77