How To Upload A Custom Logo - ZyXEL Communications 310 User Manual

Table 119 VPN > SSL VPN > Global Setting (continued)
LABEL
SSL VPN Login
Domain Name 1/
2
Message
Login Message
Logout Message
Update Client
Virtual Desktop
Logo
Browse
Upload
Reset Logo to
Default
Apply
Reset

21.3.1 How to Upload a Custom Logo

Follow the steps below to upload a custom logo to display on the remote user SSL VPN screens.
Click VPN > SSL VPN and click the Global Setting tab to display the configuration screen.
1
Click Browse to locate the logo graphic. Make sure the file is in GIF, JPG, or PNG format.
2
Click Apply to start the file transfer process.
3
Log in as a user to verify that the new logo displays properly.
4
The following shows an example logo on the remote user screen.
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Specify a full domain name for users to use for SSL VPN login. The domain name must be
registered to one of the ZyWALL's IP addresses or be one of the ZyWALL's DDNS entries.
You can specify up to two domain names so you could use one domain name for each of
two WAN ports. For example, www.zyxel.com is a fully qualified domain name where
"www" is the host.
The ZyWALL displays the normal login screen without the button for logging into the Web
Configurator.
Specify a message to display on the screen when a user logs in and an SSL VPN
connection is established successfully. You can enter up to 60 characters (0-9, a-z, A-Z,
'()+,/:=?;!*#@$_%-") with spaces allowed.
Specify a message to display on the screen when a user logs out and the SSL VPN
connection is terminated successfully. You can enter up to 60 characters (0-9, a-z, A-Z,
'()+,/:=?;!*#@$_%-") with spaces allowed.
You can upload a graphic logo to be displayed on the web browser on the remote user
computer. The ZyXEL company logo is the default logo.
Specify the location and file name of the logo graphic or click Browse to locate it.
Note: The logo graphic must be GIF, JPG, or PNG format. The graphic should use a
resolution of 103 x 29 pixels to avoid distortion when displayed. The ZyWALL
automatically resizes a graphic of a different resolution to 103 x 29 pixels. The file
size must be 100 kilobytes or less. Transparent background is recommended.
Click Browse to locate the graphic file on your computer.
Click Upload to transfer the specified graphic file from your computer to the ZyWALL.
Click Reset Logo to Default to display the ZyXEL company logo on the remote user's
web browser.
Click Apply to save the changes and/or start the logo file upload process.
Click Reset to return the screen to its last-saved settings.
Chapter 21 SSL VPN
323