ZyXEL Communications 310 User Manual page 385

Figure 251 Configuration > Object > Address > Address
The following table describes the labels in this screen. See
information as well.
Table 141 Configuration > Object > Address > Address
LABEL
IPv4 Address Configuration
Add
Edit
Remove
Object
References
#
Name
Type
IPv4 Address
IPv6 Address Configuration
Add
Edit
Remove
Object
References
#
Name
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 7.3.2 on page 122
This field is a sequential value, and it is not associated with a specific address.
This field displays the configured name of each address object.
This field displays the type of each address object. "INTERFACE" means the object uses
the settings of one of the ZyWALL's interfaces.
This field displays the IPv4 addresses represented by each address object. If the object's
settings are based on one of the ZyWALL's interfaces, the name of the interface displays
first followed by the object's current address settings.
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 7.3.2 on page 122
This field is a sequential value, and it is not associated with a specific address.
This field displays the configured name of each address object.
Chapter 28 Addresses
Section 28.2.1 on page 386
for an example.
for an example.
for more
385