The Vpn Gateway Add/Edit Screen - ZyXEL Communications 310 User Manual

Figure 181 Configuration > VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See
Table 109 Configuration > VPN > IPSec VPN > VPN Gateway
LABEL
Add
Edit
Remove
Activate
Inactivate
Object References
#
Status
Name
My address
Secure Gateway
VPN Connection
Apply
Reset

20.3.1 The VPN Gateway Add/Edit Screen

The VPN Gateway Add/Edit screen allows you to create a new VPN gateway policy or edit an
existing one. To access this screen, go to the VPN Gateway summary screen (see
page 294), and click either the Add icon or an Edit icon.
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you want to
remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 7.3.2 on page 122
This field is a sequential value, and it is not associated with a specific VPN gateway.
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the name of the VPN gateway
This field displays the interface or a domain name the ZyWALL uses for the VPN gateway.
This field displays the IP address(es) of the remote IPSec routers.
This field displays VPN connections that use this VPN gateway.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Section 20.3.1 on page 295
for an example.
Chapter 20 IPSec VPN
for more information.
Section 20.3 on
295