ZyXEL Communications 310 User Manual page 441

The following table describes the labels in this screen.
Table 173 Configuration > DHCPv6 > Lease > Add
LABEL
Name
Lease Type
Interface
DUID
Prefix
DNS Server
Starting IP Address
End IP Address
NTP Server
SIP Server
User Defined
Address
OK
Cancel
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Type the name for this lease object. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
Select the lease type for this lease object. You can choose from Prefix Delegation,
DNS Server, Address, Address Pool, NTP Server, or SIP Server.
Select the interface for this lease object.
If you select Prefix Delegation or Address in the Lease Type field, enter the DUID of
the interface.
If you select Prefix Delegation or Address in the Lease Type field, enter the IPv6
prefix of the interface.
If you select DNS Server in the Lease Type field, select a request object or User
Defined in the DNS Server field and enter the IP address of the DNS server in the
User Defined Address field below.
If you select Address Pool in the Lease Type field, enter the first of the contiguous
addresses in the IP address pool.
If you select Address Pool in the Lease Type field, enter the last of the contiguous
addresses in the IP address pool.
If you select NTP Server in the Lease Type field, select a request object or User
Defined in the NTP Server field and enter the IP address of the NTP server in the User
Defined Address field below.
If you select SIP Server in the Lease Type field, select a request object or User
Defined in the SIP field and enter the IP address of the SIP server in the User Defined
Address field below.
If you select DNS Server, NTP Server, or SIP Server as your lease type, you must
enter the IP address of the server your selected.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 36 DHCPv6
441