The One-Time Schedule Add/Edit Screen - ZyXEL Communications 310 User Manual

Chapter 30 Schedules

30.2.1 The One-Time Schedule Add/Edit Screen

The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
click either the Add icon or an Edit icon in the One Time section.
Figure 261 Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 151 Configuration > Object > Schedule > Edit (One Time)
LABEL
Configuration
Name
Date Time
StartDate
StartTime
StopDate
StopTime
OK
Cancel
398
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores( ), or dashes (-), but the first character cannot be a number.
_
This value is case-sensitive.
Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule begins.
• Hour - 0 - 23
• Minute - 0 - 59
Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule ends.
• Hour - 0 - 23
• Minute - 0 - 59
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Section 30.2 on page
ZyWALL 110/310/1100 Series User's Guide
397), and