Dhcp Table Screen; Table 6 Home: Show Statistics - ZyXEL Communications ZyWALL 2Plus User Manual

The following table describes the labels in this screen.

Table 6 Home: Show Statistics

LABEL
Port
Status
TxPkts
RxPkts
Tx B/s
Rx B/s
Up Time
System Up Time This is the total time the ZyWALL has been on.
Poll Interval(s)
Set Interval
Stop

2.4.5 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows computers to
obtain TCP/IP configuration (including IP addresses, subnet masks, gateways, and some
network information like the IP addresses of DNS servers) at start-up from a server. You can
configure the ZyWALL as a DHCP server or disable it. When configured as a server, the
ZyWALL provides the TCP/IP configuration for the clients. If the ZyWALL's DHCP service
is disabled, you must have another DHCP server on your LAN, or else the computers must be
manually configured.
Click Show DHCP Table in the HOME screen when the ZyWALL is set to router mode.
Read-only information here relates to your DHCP status. The DHCP table shows current
DHCP client information (including IP Address, Host Name and MAC Address) of all
network clients using the ZyWALL's DHCP server.
Chapter 2 Introducing the Web Configurator
DESCRIPTION
These are the ZyWALL's interfaces.
For the LAN, this displays the port speed and duplex setting.
For the WAN and dial backup ports, this displays the port speed and duplex setting if
you're using Ethernet encapsulation and Down (line is down), Idle (line (ppp) idle),
Dial (starting to trigger a call) or Drop (dropping a call) if you're using PPPoE
encapsulation.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total amount of time the line has been up.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Click Stop to stop refreshing statistics.
ZyWALL 2 Plus User's Guide
65