ZyXEL Communications 310 User Manual page 498

Chapter 38 Log and Report
Table 199 Configuration > Log & Report > Log Setting > Log Category Settings (continued)
LABEL
System Log
USB Storage
E-mail Server 1
E-mail
E-mail Server 2
E-mail
Remote Server
1~4
OK
Cancel
498
DESCRIPTION
Select which events you want to log by Log Category. There are three choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - create log messages and alerts from this
category
enable normal logs and debug logs (yellow check mark) - create log messages, alerts,
and debugging information from this category; the ZyWALL does not e-mail debugging
information, however, even if this setting is selected.
Select which event log categories to save to a connected USB storage device. There are
three choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - save log messages and alerts from this category
enable normal logs and debug logs (yellow check mark) - save log messages, alerts,
and debugging information from this category.
Select whether each category of events should be included in the log messages when it is e-
mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings
specified in E-Mail Server 1. The ZyWALL does not e-mail debugging information, even if it
is recorded in the System log.
Select whether each category of events should be included in log messages when it is e-
mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings
specified in E-Mail Server 2. The ZyWALL does not e-mail debugging information, even if it
is recorded in the System log.
For each remote server, select what information you want to log from each Log Category
(except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information,
alerts, and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
ZyWALL 110/310/1100 Series User's Guide