ZyXEL Communications 310 User Manual page 71

Table 14 Dashboard (continued)
LABEL
Device
Status
Zone
IP Address/
Mask
Device
Information
System
Name
Model Name
Serial
Number
MAC Address
Range
Firmware
Version
System Status
System
Uptime
Current
Date/Time
VPN Status
DHCP Table
Current Login
User
Number of
Login Users
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
This field displays the name of the device connected to the USB port if one is connected.
This field displays the current status of each interface or device installed in a slot. The
possible values depend on what type of interface it is.
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the
port speed and duplex setting (Full or Half).
For cellular (3G) interfaces, see
can appear.
This field displays the zone to which the interface is currently assigned.
This field displays the current IP address and subnet mask assigned to the interface. If the
interface is a member of an active virtual router, this field displays the IP address it is
currently using. This is either the static IP address of the interface (if it is the master) or
the management IP address (if it is a backup).
This identifies a device installed in one of the ZyWALL's extension slots or USB ports.
This field displays the name used to identify the ZyWALL on any network. Click the icon to
open the screen where you can change it.
This field displays the model name of this ZyWALL.
This field displays the serial number of this ZyWALL. The serial number is used for device
tracking and control.
This field displays the MAC addresses used by the ZyWALL. Each physical port has one
MAC address. The first MAC address is assigned to physical port 1, the second MAC
address is assigned to physical port 2, and so on.
This field displays the version number and date of the firmware the ZyWALL is currently
running. Click the icon to open the screen where you can upload firmware.
This field displays how long the ZyWALL has been running since it last restarted or was
turned on.
This field displays the current date and time in the ZyWALL. The format is yyyy-mm-dd
hh:mm:ss.
Click this to look at the VPN tunnels that are currently established. See
page 74.
Click this to look at the IP addresses currently assigned to the ZyWALL's DHCP clients and
the IP addresses reserved for specific MAC addresses. See
This field displays the user name used to log in to the current session, the amount of
reauthentication time remaining, and the amount of lease time remaining.
This field displays the number of users currently logged in to the ZyWALL. Click the icon to
pop-open a list of the users who are currently logged in to the ZyWALL.
Section 7.5 on page 132 the Web Help for the status that
Section 5.2.5 on page
Chapter 5 Dashboard
Section 5.2.1 on
77.
71