Vpn Setup Wizard; Welcome - ZyXEL Communications 310 User Manual

Chapter 4 Quick Setup Wizards
The following table describes the labels in this screen.
Table 13 Interface Wizard: Summary WAN
LABEL
Encapsulation
Service Name
Server IP
User Name
Nailed-Up
Idle Timeout
Connection ID
WAN Interface
Zone
IP Address
Assignment
First DNS Server
Second DNS
Server
Close

4.3 VPN Setup Wizard

Click VPN Setup in the main Quick Setup screen to open the VPN Setup Wizard Welcome screen.
Figure 29 VPN Setup Wizard

4.3.1 Welcome

Use wizards to create Virtual Private Network (VPN) rules. After you complete the wizard, the Phase
1 rule settings appear in the VPN > IPSec VPN > VPN Gateway screen and the Phase 2 rule
settings appear in the VPN > IPSec VPN > VPN Connection screen.
48
DESCRIPTION
This displays what encapsulation this interface uses to connect to the Internet.
This field only appears for a PPPoE interface. It displays the PPPoE service name specified
in the ISP account.
This field only appears for a PPTP interface. It displays the IP address of the PPTP server.
This is the user name given to you by your ISP.
If No displays the connection will not time out. Yes means the ZyWALL uses the idle
timeout.
This is how many seconds the connection can be idle before the router automatically
disconnects from the PPPoE server. 0 means no timeout.
If you specified a connection ID, it displays here.
This identifies the interface you configure to connect with your ISP.
This field displays to which security zone this interface and Internet connection will belong.
This field displays whether the WAN IP address is static or dynamic (Auto).
If the IP Address Assignment is Static, these fields display the DNS server IP
address(es).
Click Close to exit the wizard.
ZyWALL 110/310/1100 Series User's Guide