Secure Telnet Using Ssh Examples - ZyXEL Communications 310 User Manual

Table 187 Configuration > System > SSH (continued)
LABEL
Add
Edit
Remove
Move
#
Zone
Address
Action
Apply
Reset

37.8.5 Secure Telnet Using SSH Examples

This section shows two examples using a command interface and a graphical interface SSH client
program to remotely access the ZyWALL. The configuration and connection steps are similar for
most SSH client programs. Refer to your SSH client program user's guide.
37.8.5.1 Example 1: Microsoft Windows
This section describes how to access the ZyWALL using the Secure Shell Client program.
Launch the SSH client and specify the connection information (IP address, port number) for the
1
ZyWALL.
Configure the SSH client to accept connection using SSH version 1.
2
A window displays prompting you to store the host key in you computer. Click Yes to continue.
3
Figure 327 SSH Example 1: Store Host Key
Enter the password to log in to the ZyWALL. The CLI screen displays next.
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry. Refer to
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
it before doing so. Note that subsequent entries move up by one when you take this
action.
To change an entry's position in the numbered list, select the method and click Move to
display a field to type a number for where you want to put it and press [ENTER] to move
the rule to the number that you typed.
This the index number of the service control rule.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is allowed or denied
to access.
This displays whether the computer with the IP address specified above can access the
ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Table 185 on page 461 for details on the screen that opens.
Chapter 37 System
475