Dhcp Table Screen - ZyXEL Communications ZyWALL 110 User Manual

Hide thumbs Also See for ZyWALL 110:

Table of Contents

5.2.4 DHCP Table Screen

Click on the DHCP Table link to look at the IP addresses currently assigned to DHCP clients and the

IP addresses reserved for specific MAC addresses. The following screen will show.

Figure 80 Dashboard > System Status > DHCP Table

This table describes the fields in the above screen.

Table 22 Dashboard > System Status > DHCP Table

Chapter 5 Dashboard

This field is a sequential value, and it is not associated with a specific entry.

This field identifies the interface that assigned an IP address to a DHCP client.

This field displays the IP address currently assigned to a DHCP client or reserved

for a specific MAC address. Click the column's heading cell to sort the table

entries by IP address. Click the heading cell again to reverse the sort order.

This field displays the name used to identify this device on the network (the

computer name). The ZyWALL/USG learns these from the DHCP client requests.

"None" shows here for a static DHCP entry.

This field displays the MAC address to which the IP address is currently assigned

or for which the IP address is reserved. Click the column's heading cell to sort

the table entries by MAC address. Click the heading cell again to reverse the sort

For a static DHCP entry, the host name or the description you configured shows

here. This field is blank for dynamic DHCP entries.

If this field is selected, this entry is a static DHCP entry. The IP address is

reserved for the MAC address.

If this field is clear, this entry is a dynamic DHCP entry. The IP address is

assigned to a DHCP client.

To create a static DHCP entry using an existing dynamic DHCP entry, select this

field, and then click Apply.

To remove a static DHCP entry, clear this field, and then click Apply.

ZyWALL/USG Series User's Guide

Show Quick Links

Table of Contents