Core Dump Screen - ZyXEL Communications 310 User Manual

The following table describes the labels in this screen.
Table 207 Maintenance > Diagnostics > Packet Capture > Files
LABEL
Remove
Download
#
File Name
Size
Last Modified

40.4 Core Dump Screen

Use the Core Dump screen to have the ZyWALL save a process's core dump to an attached USB
storage device if the process terminates abnormally (crashes). You may need to send this file to
customer support for troubleshooting.
Click Maintenance > Diagnostics > Core Dump to open the following screen.
Figure 358 Maintenance > Diagnostics > Core Dump
The following table describes the labels in this screen.
Table 208 Maintenance > Diagnostics > Core Dump
LABEL
Save core dump to USB
storage (if ready)
Apply
Reset
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Select files and click Remove to delete them from the ZyWALL or the connected USB
storage device. Use the [Shift] and/or [Ctrl] key to select multiple files. A pop-up window
asks you to confirm that you want to delete.
Click a file to select it and click Download to save it to your computer.
This column displays the number for each packet capture file entry. The total number of
packet capture files that you can save depends on the file sizes and the available flash
storage space.
This column displays the label that identifies the file. The file name format is interface
name-file suffix.cap.
This column displays the size (in bytes) of a configuration file.
This column displays the date and time that the individual files were saved.
DESCRIPTION
Select this to have the ZyWALL save a process's core dump to an attached USB
storage device if the process terminates abnormally (crashes). If you clear this
option the ZyWALL only saves
Click Apply to save the changes.
Click Reset to return the screen to its last-saved settings.
Chapter 40 Diagnostics
515