If failed:
The following screen appears.
AUTO TEST
CHECKING...ERROR
PDW-700/V1 (E)
4-10-11. FOCUS ACTUATOR
This menu allows you to check the focus of the 2-axis
actuator.
Menu hierarchy:
[DRIVE MAINTENANCE]
→ [CHECK]
→ [OPTICAL BLOCK]
→ [FOCUS ACTUATOR]
1. A confirmation screen appears.
2. Select "YES" by turning the MENU knob, and press
the MENU knob.
FOCUS ACTUATOR
CHECK START?
*YES
NO
Check that the 2-axis actuator moves several times.
. If the actuator does not move or its movement is not
smooth, the harness may be connected improperly or
the optical block may be defective.
The result appears.
FOCUS ACTUATOR
CHECKING...OK
If failed:
The following screen appears.
FOCUS ACTUATOR
CHECKING...ERROR
4-93