Removing/Installing Lcd Block; Lcd Block - Sony CBK-HD01 Maintenance Manual

1-8. Removing/Installing LCD Block

1-8-1. LCD Block

1. Remove the inside panel. (Refer to Section 1-7-3.)
2. Remove the two knobs (A).
3. Open the SW door (R) , and remove the two knobs (B) .
4. Remove the LCD harness holder.
5. Disconnect the harness from the six connectors
(CN700, CN701, CN702, CN703, CN802, CN850) on
the FP-157 board.
6. Remove the nine screws (PSW2 x 5) , and remove the
FP-157 board.
n
After removing the FP-157 board, be careful not to
drop the unfixed parts.
7. Remove the unfixed parts.
PDW-700/V1 (E)
Knobs (A)
Harness
Harnesses
Harnesses
CN850
CN700 CN701
PSW
2 x 5
FP-157 board
Unfixed parts
Knobs (B)
SW door (R)
CN702
FP-157 board
CN802
CN703
PSW2 x 5
LCD
harness holder
Inside panel
1-41